Question: After we flush the toilet, when the tank is almost full ... That’s the ball cock, or water inlet valve. This valve is operated by the “wire” and “ball” mentioned in your ...

Replacing the entire inlet valve involves: Removing the vertical valve assembly from the toilet tank. Disengaging it from the flush lever. Also disengaging it from the arm that lifts the flapper ...

This is the mechanism that controls the refilling of the tank and bowl to the correct water level after each flush. In an older toilet, you’ll typically see a ballcock valve assembly featuring a ...

In a pinch, you may be able to lift the lid off the toilet tank and manually pull on the lever attached to the handle. This will open the flush valve at the bottom of the tank, emptying the water ...

Then, flush to see if it is working again. If it turns out to be broken, replace the valve ... Clogged inlet holes can be a reason for low water in a toilet. Inlet holes, also called rim jets ...

Replacing the flush valve is a chore, as it involves removing the tank from the bowl. So, you will need to turn off the water to the toilet, disconnect the supply line to the fill valve and drain ...

The first is to remove the tank cover, flush the toilet, spray a little silicone lubricant into the top of the intake shaft where the valve is located, and work the float mechanism up and down the ...

First, turn off the water supply valve under the toilet. Next, flush the toilet; this will empty the tank. Unscrew the coupling that connects the water supply tube to the bottom of the toilet ...

When you’re in shopping mode for a new toilet, remember that a large price ... As their name implies, these toilets have a flush valve that relies on gravity. Water drops from the tank into ...