It should be a piece of cake if you program your Attiny85 chip (not Digispark) using your existing Arduino IDE with the help of one “USB tiny ISP (v2.0)” programmer. The software/Arduino sketch /* * ...

Hi, I'm Bill. I'm a software developer with a passion for making and electronics. I do a lot of things and here is where I ...

when it detects a moving target. Most Digital PIR sensor modules have three connector pins: Vcc (5V), Ground (0V), and Output. The output is a digital LOW or HIGH, depending on whether the sensor has ...

Using motion detectors and an Arduino you can trigger lights, fans, ... } } Here is the circuit for the Sparkfun Active Low style sensor. PIR Pin “+” connects to Arduino +5.

When everything’s plugged in, this is how your Arduino, motion sensor, and power relay should look. Jeremy S. Cook Plug the male-to-female jumper wires into the motion sensor pins.

When the PIR sensor sees something it transmits a code the base station where the ‘motion’ alert message is displayed. The entire device is powered by a 9V battery and stuffed inside a ...

(Passive InfraRed sensor) A device used to detect motion by receiving infrared radiation. When a person walks past the sensor, it detects a rapid change of infrared energy and sends a signal. PIR ...

Makers and developers looking for a motion sensor Arduino Shield, are sure to be interested in this new ICU-Duino which has been created by Patrick Thomas Mitchell based in Ottawa, Canada ...

You'll definitely need some gear for it—the Arduino for one, but also a PIR motion sensor, not to mention the (cleaned and rinsed!) Raid Power Sprayer motorized spray bottle.